 SmartBRO Users only
This post is originally from [CRIBZ]sadvel of pldtplay..
[The following method does not need to be performed if you are a new SmartBro subscriber (for the past month), since the SmartBro technicians will already do these hack for you.]
Smart BRO Plan 999 wrote:
Smart Bro Wireless Broadband Internet is offered at Plan 999 with a speed of up to 384 kbps. With Smart Bro Plan 999 you get a [Only registered and activated users. ] broadband connectionthat’s up to 7x faster than dial-up, as well as other Value Added Services for your Smart BRO connection, changing the way you surf the net.
Yeah that's what their advertisements say. But did you know that the default speed that is offered to us by Smart Bro is only limited to 256 kbps? Therefore we got about 128 kbps short of what we had expected from their service.
Hmm.. so why not do something about it. Why don’t we change the default speeds (download and upload) to up to 500 kbps! Yup, we can do that. Simply Amazing right? Heheh. So just read on to know how..
But before anything else..
Disclaimer: Please take note that I am not forcing you to do what I am about to teach. I will not be held responsible for anything that might happen to the materials of the users involved during the process. Proceeding through the process of the tutorial means that you have acknowledged my disclaimer statement.
PART 1: Preparations
WARNING: During the process, you will be disconnected from theinternet but of course you'll be able to get back. So I suggest you copy and paste this tutorial on notepad for a safer reference, just in case.
Follow the steps:
1. Go to control panel and then onto Network Connections. You should see your Local Area Connection. Right click on it and click Properties.
2. A new window pops-up, which says "Local Area Connection Properties". On the General tab, there should be a box which contains a list with checkboxes beside them. Scroll down to the bottom and you should see the internet protocol (TCP/IP) item. Double click it.
3. Another window pops-out. It says "Internet Protocol (TCP/IP) Properties" and you should be on the General tab. There are two options there enabled by default: Obtain an Ip address automatically and Obtain DNS server address automatically. Now read carefully for this one:
- Click on Use the following IP address option. Enter these data:
- IP address: 10.20.30.40/ 10.0.0.1
- Subnet mask: 255.0.0.0
- Default [Only registered and activated users. ]leave it blank
- Click on Use the following DNS Server addresses:
- Preferred DNS server: leave it blank
- Alternate DNS server: leave it blank
After you entered correctly all the data, press Ok.
4. You are back at the Local Area Connection Properties window. Press Ok to apply the changes. Wait for a moment for the changes to take effect. By this time you will be disconnected from the internet. But dont worry, you'll be able to be back of course (Just refer to PART 4 below to know how to get back to the internet).
PART 2: The Canopy IP Address Quest
Now you need to know your Canopy IP Address. There are two ways I know of:
-> Method 1 (The Safe Way):
1. Go to Start -> Run -> cmd.exe. On the command promt, type arp -a (take note of the space after the word arp). The comman promt will display several IP addresses. Example:
C:\Documents and Settings\giluk_no_jutsu>arp -a
Interface: 10.20.30.40 --- 0x2
Internet Address Physical Address Type
10.0.0.1 0a-00-3e-f7-de-2d dynamic
10.247.222.45 0a-00-3e-f7-de-2d dynamic
So my Canopy IP Address would be 10.247.222.45.
Note: For some reasons, some people have encountered problems regarding the above method. If that method fails and doesnt seem to work for you, please proceed to the next method...
-> Method 2 (The Not-So-Safe Way):
EDITED (June1,2007): The site for converting you ESN code into your Canopy IP Address has either been deleted or moved by its owner. So please use Method 1 instead. Thanks.
This method is one of the most effective ways to get your Canopy IP address, but its a bit risky.
1. What you need to do is to climb up to your rooftop to reach your Smart Bro antenna (Yeah you need to climb up). On the back side of the antenna, you should see the antenna's ESN code (you should have a combination of 12 characters composed of numbers and alphabets). Copy the code. As for minors, please ask for adults to climb the roof for you .
2. Once you have taken note of you antenna's ESN code, go to this site: [Only registered and activated users. ] to convert your ESN code into a Canopy IP Address. The resulting IP address is your Canopy IP add so take note of it (better yet, i suggest you memorize it). You're done.
There, now you have your Canopy IP Address. Hooray for you! Now let's get our hands real dirty as we go to the next part..
PART 3: Into the Forbidden Domain we Hack!
Note: Make sure you have done the set-up on Part 1 above before proceeding.
1. Open your web browser and enter your Canopy IP address on the address bar. You will be brought to the Canopy Homepage.
2. On the left side of the Canopy page, you should see a navigation box. Click Configuration.
3. Click on the Quality of Service (QoS) Tab. You should see your Bandwitdh Settings. Take a look at your Sustained Uplink Data Rate and Sustained Downlink Data Rate. By default they should be both at 256. See? Those are your default download and upload limits. Kinda sucks right?
4. Alright, so listen well. Change both of the Uplink and Downlink values to 500. Actually you can set the values to any number you like as long as their total would be 1000 (eg: you can have your downlink: 600 and uplink: 400, or you can have downlink: 700 and uplink: 300). However, The recommended value for both uplink and downlink rates is both at 500. So I suggest you have the recommended value as well. Click the Save Changes button.
5. The screen should say Reboot Required. So press the Reboot button. By this time, your Local Area Connection icon on your tray area (botton-right side of your desktop should have an X mark on it. Just wait for a while until that X mark disappears. That's it.
PART 4: Getting Back Online
The last thing you need to do is to connect back to the internet.
1. So go back to Control Panel, and then onto Network Connection. You should see your Local Area Connection. Right click on it and click Properties.
2. A new window pops-up, which says "Local Area Connection Properties". On the General tab, there should be a box which contains a list with check boxes beside them. Scroll down to the bottom and you should see the Internet Protocol (TCP/IP) item. Double click it.
3. Another window pops-out. It says "Internet Protocol (TCP/IP) Properties" and you should be on the General tab. Now click on Obtain IP address automatically and Obtain [Only registered and activated users. ] DNS Server automatically. Press Ok.
4. You're back at the Local Area Connection Properties window. Again Press Ok. Wait for a moment for the changes to take effect.
5. Open your Web Broser and try to test your speed at speedtest.net or testmy.net to confirm your new download and upload speeds. You can also try going to YouTube and watch the buffer speed go zoom zoom zoom!
Whew! That's it. Enjoy Surfin!
I Got This and edited from a forum..
I actually Do this too!,. Tweaking, boosting my NET connection..
I hope this help for smartbro users
+REP PLEASE?? | 
|G3|
k[ore]
Linear Mode
