Water Bong (Make one yourself)

Theebomb1080 · 07-23-2008, 11:25 PM

Hey guys this is a tutorial made from Theebomb1080 purely. If you want to use this tutorial on another site please ask me for permission.

A waterfall bong is often used with a 2 liter or a sobe bottle. I personally like the sobe bottle one better.

What you need:

-A 2 litter bottle YOU WILL NEED THE LID (or sobe bottle; anyone will do)
-A lighter
-A rubberband (Not needed but helpful)
-A small amount of tinfoil
-A pen, pencil, pin, nail (anything that will make small holes).

First thing we must do is make the bong. So lets begin...

Step 1: Take your plastic bottle or sobe bottle and make a hole in the bottom of the bottle about the size of a pencil.

Step 2: In the middle of the cap of the bottle cut a hole.

Step 3: Poke holes through the tinfoil with whatever sharp object you're doing. (The smaller but more holes they are the better I personally think). However, make sure you leave enough room for the weed to sit on top. A rubberband around the tinfoil on top of the cap does help but isn't necessarily.

Congratulations, we've now made the bottle! Even Dak could get this far in the tutorial.

Now we need to know how to use this device we just made.

Step 1: Go ahead and put your finger over the hole you made on the bottom of the bottle. Make sure that the hole is over something like a bucket, bathtub, sink, bowl...whatever it may be so water can pour out of the bottle into it. Now, while holding the hole feel the bottle up with water from the top.

Step 2: Go ahead and screw the cap back on and place the weed on top of the tinfoil. (Make sure you don't sneeze or breathe heavily of that weed may just fly away also don't tighten it to the point it'll be hard to get back off). Go ahead and bust out your handy dandy lighter and burn that weed up! Keep it burning and go ahead and remove your finger blocking the hole on the bottom and let that water flow. While the water is rushing from the bottom of the bottle the smoke from the top is heading to the bottom.

Step 3: OH SHIT SON! See all that smoke inside of there? Go ahead and remove the cap. Be CAREFUL though it might be hot.

Step 4: After all of that you'll have that big bottle full of all that compressed smoke. Go ahead and put your mouth over the top of the bottle (the cap should be removed already) and SUCK IT but please be careful all that sucking could create a blackhole.

Hopefully this picture will help you.

Let me know how it works or if you have any questions/concerns! + Rep please!

Other threads you might be interested in:
How to Roll a Joint
Apple Pipe (Make one yourself)

**GotRice[?]** · 07-24-2008, 04:43 AM

hahaha nice one lmao
can't wait to try this

Nikki-Nervosa · 07-24-2008, 04:48 AM

Quit Plagiarizing
It's not legal.

**Hodizzle** · 07-24-2008, 07:42 AM

Sorry, I've seen/used much better homemade water bongs before. Instead, you can do something similar with the hole in the cap for the pot, but don't cut the hole in the bottom of the bottle. Instead cut a small hole higher up and put a small rubber hose in there. Fix it with something (glue, etc.) Now you fill the bottle part of the way from the cap. Set up your weed, and smoke through the hose. This is a much more user friendly version, and you can even freeze the water for a better cooling effect. Take the cap off to change the water. It works better with sturdier bottles (I think it was the Tropinca Simply Orange or something like that that I saw used).

Theebomb1080 · 07-24-2008, 09:43 AM

Nikki, I wrote this purely by myself with the use of someone else's picture. Hodizzle I know what version you are talking about with the hose. But I don't think most people have that, and I was debating to post that version or not. Also I'd just stick with the sobe bottle personally plus on the bottom they have that indentation which makes it easier to pierce the glass.